How to Reset XP-M1000i Controller to Factory Default Setting (ColdStart)
Problem (Issue) Statement: | How to reset XP-M1000i controller to factory default setting (ColdStart) |
Description: | This article will guide users to reset XP-M1000i controller to factory default setting (ColdStart). Warning! Performing the ColdStart operation will delete all the memory and revert back to default settings for the XP-SNET controller! Only perform this step if you are absolutely sure to proceed. |
Related Software: | NIL |
Related Hardware: |
|
System Application: | NIL |
Symptom and Finding: | NIL |
Cause: | For first time guide to reset XP-M1000i controller to factory default setting (ColdStart). |
Solution: | Summary:
. . Step-by-step Guide:
Step 1: Press and hold the ColdStart button. . Step 2: Turn off the power supply, wait for 2 seconds before turning on the power supply. . Step 3: Release the ColdStart button after ColdStart LED is lighted up. . Step 4: The controller will respond with a long beep sound. |
Common Issues: | NIL |
Porting Date: | 14/02/2020 |
PROOF-READ
.
Related Articles.
Containing the label "xp-m1000i"
.
.
© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.