How to Reset XP-M2000i Controller to Factory Default Setting (ColdStart)

Owned by Tan Rong Wei (Unlicensed)
Last updated: Feb 14, 2020
1 min read
Problem (Issue) Statement:

How to reset XP-M2000i controller to factory default setting (ColdStart)

Description:

This article will guide users to reset XP-M2000i controller to factory default setting (ColdStart).

Warning!

Performing the ColdStart operation will delete all the memory and revert back to default settings for the XP-SNET controller! Only perform this step if you are absolutely sure to proceed.

Related Software:NIL
Related Hardware:
  • XP-M2000i
  • XP-M2300i
System Application:NIL
Symptom and Finding:

NIL

Cause:For first time guide to reset XP-M2000i controller to factory default setting (ColdStart).
Solution:

Summary:

  • To reset XP-M2000i controller to factory default setting (ColdStart).

.

.

Step-by-step Guide:

  • To reset XP-M2000i controller to factory default setting (ColdStart):

Step 1: Press and hold the COLDSTART button.

.

Step 2: Press and release the RESET button.

.

Step 3: Wait for Local Diagnostic LED & Main Fail LED to light up together.

.

Step 4: Release the COLDSTART button.

Common Issues:

NIL

Porting Date:14/02/2020

PROOF-READ

.

Related Articles.

Containing the label "xp-m2000i"

Filter by label

There are no items with the selected labels at this time.

.

.

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.