Problem (Issue) Statement: | How to troubleshoot the issue where XP-SNET controller is unable to send data to xPortalNet software | ||
Description: | This article will guide users on how to troubleshoot the issue where XP-SNET controller is unable to send data to xPortalNet software. | ||
Related Software: |
| ||
Related Hardware: |
| ||
System Application: | NIL | ||
Symptom and Finding: |
| ||
Cause: |
| ||
. . Summary:
. Step-by-step Guide:
Step 1: Before checking the uplink connection, please ensure that the wiring termination for the XP-SNET controller is connected properly.
. . Step 2: Please check the uplink connection on the XP-SNET controller as per the following table. . . .
Step 1: Check and ensure that the address setting for the ADDRESS DIP switch on the XP-SNET controller is the same as the Unit No configuration in the Controller Setup window (xPortalNet Server > Server Admin > System Device Setup > Controller) . . . Step 2: For LAN connection, check and ensure that the controller IP address configured in the Web Diagnostic is the same as the Remote IP Address in Connection Setup window (xPortalNet Server > Server Admin > Connection Setup). Also, ensure that the Server IP address in the Web Diagnostic is the same as the Server PC's IP Address. . . Step 3: For MCI connection, check and ensure that the Comm Port No connecting to the MCI is the same as the configured Comm No setting in Connection Setup window (xPortalNet Server > Server Admin > Connection Setup). .
| |||
Common Issues: | NIL | ||
Porting Date: | 19/4/2019 |
.
|
.
.