Problem (Issue) Statement: | How to connect XP-M4L controller to card readers | ||
Description: | A guide to connect XP-M4L controller with card readers. | ||
Related Software: |
| ||
Related Hardware: |
| ||
System Application: |
| ||
Symptom and Finding: | NA | ||
Cause: | For first time connection between XP-M4L controller with reader. | ||
Solution: | Summary
|
User may refer to How to Configure Plato Reader's DIP Switch Address Settings for the complete procedures on configuring the address settings on Plato Reader. |
Step 1: Please follow the wiring diagram as shown below:
Figure 2: Wiring Diagram to connect XP-M4L Controller to XP-MK800E
Step 2: The table below indicates the XP-MK800E address settings and the corresponding lift panel number.
Step 1: Please follow the wiring diagram as shown below:
Figure 3: Wiring Diagram to connect XP-M4L Controller to Third Party Readers Directly
MicroEngine controllers only support open-collector type Wiegand 3rd party readers. |
Date Documentation:
17/7/2018 (Rev 1.0)
.
|
.
.