Summary
Step by Step:
Ensure that the xPortalNet Services is Running:
Step 1: Open xPortalNet Comm Service.
Step 2: Ensure that the xPortalNet Comm Service Status is Running.
Figure 2: xPortalNet Comm Service Running pop-up message
Ensure that the alarm monitoring controller settings are configured in xPortalNet Server:
To configure Instruction Control setup at xPortalNet client:
Step 1: Go to xPortalNet Client > System Setting > Instruction Control. The Instruction Setup window will be shown as below:
Figure 1: Instruction Setup Window
Step 2: Click Add to create a new instruction. The Add Instruction window will be shown as below. Fill in the respective fields and click OK to save changes.
Figure 2: Add Instruction Window
![Technical Knowledge Base > How to Configure Instruction Control for Alarm Monitoring System Application at xPortalNet Client > worddav8541bf21e7666c0faabdc5c98c2f6520.png](https://microengine.atlassian.net/wiki/download/thumbnails/156794887/worddav8541bf21e7666c0faabdc5c98c2f6520.png?version=2&modificationDate=1542784801285&cacheVersion=1&api=v2&width=600)
- * represents required field
- Users can add up to a maximum of 8 Inputs and Outputs in one Instruction Setup.
|
Step 3: Repeat steps 1 and 2 to add additional Instruction Setups as necessary.
Step 4: The following message window will be prompted to show that Record is Added. Click OK to continue.
![Technical Knowledge Base > How to Configure Instruction Control for Alarm Monitoring System Application at xPortalNet Client > worddavf5ff8af9c077b9abf5439cb8fa165632.png (Record Added Window) Record Added Window](https://microengine.atlassian.net/wiki/download/thumbnails/156794887/worddavf5ff8af9c077b9abf5439cb8fa165632.png?version=1&modificationDate=1527139780112&cacheVersion=1&api=v2&width=450)
Figure 3: Record Added Window
To send Door Settings to Controller after completing the configuration:
Step 1: After completing the configuration settings, users MUST send all settings to the controller.
Step 2: Go to Device Comm > Send Door Setting.
Figure 4: Send Door Setting Button
Step 3: Select the controller to send all settings. Click Send All Settings to send all configuration settings to the selected controller.
Step 4: The Delivery Report will be prompted. Ensure that software have sent all configuration settings successfully.
Step 1: To check the status of the controller, go to xPortalNet Client > Device List > Controller List to verify that the controller Status is Up.
Figure 5: Controller List under Device List tab
Step 2:To check the status of the alarm controller, go to xPortalNet Client > Device List > Alarm Controller List to verify that the alarm controller Status is Up.
Figure 6: Alarm Controller List under Device List tab
Step 3: To check the status of the output, go to xPortalNet Client > Output List to observe the output status.
Figure 7: Output List under Device List tab
Step 4: To check the status of the input, go to xPortalNet Client > Input List to observe the input status.
Figure 8: Input List under Device List tab
![Technical Knowledge Base > How to Configure Instruction Control for Alarm Monitoring System Application at xPortalNet Client > worddav1f594ec771a7c11c4c4e95ff8c034b3a.png](https://microengine.atlassian.net/wiki/download/thumbnails/156794887/worddav1f594ec771a7c11c4c4e95ff8c034b3a.png?version=2&modificationDate=1542784880830&cacheVersion=1&api=v2&width=600)