How to Configure Global AntiPassback Controller (GAC) Settings in xPortalNet Server

Problem (Issue) Statement:	How to configure Global AntiPassback Controller (GAC) settings in xPortalNet Server
Description:	A guide to configure Global AntiPassback Controller (GAC) settings in xPortalNet Server. Global AntiPassback feature allows the software to enforce AntiPassback in the global network (across different controllers connected in the same network). When enabled, AntiPassback prevents a card user from gaining two successive accesses in the same direction without gaining access in the opposite direction first. AntiPassback therefore prevents double entry or exit access through a door or area for the same card access. Note XP-SNET-GAC controller is only supported for LAN Network Communications only. . Tip Controller models supported as GAC Client: XP-SNETv3.36, XP-SNETv4, XP-M2000i v6.10 and above, and XP-M1000i v6.00 and above.
Related Software:	xPortalNet v1.5
Related Hardware:	XP-M1000iv2 / M1300i v6.00 above XP-M2000i / M2300i v6.10 above XP-SNET / SNETv4 v3.36 above XP-GAC v2.40
System Application:	Door Access System Car Park Access System Turnstile Access System
Symptom and Finding:	NIL
Cause:	For first time configuration on Global AntiPassback Controller (GAC) settings in xPortalNet Server.
Solution:	Warning! XP-SNET-GAC currently do not support odd numbered card lengths, e.g. 5, 7, 9 card number lengths. Summary To configure XP-SNET-GAC controller device setup. To configure GAC setup. To enable GAC feature and assign Controllers as client GAC controllers to enforce Global AntiPassback. Note Global Antipassback feature is only supported for LAN Network Communications. Step-by-step Guide: To configure XP-SNET-GAC controller device setup: Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Connection > Add. Step 2: The Add Connection window will be shown. Fill up the connection information accordingly. Click OK to save the changes. Figure 1: Add Connection Window Step 3: Go to xPortalNet Server > Server Admin > System Device Setup > Controller > Add. Step 4: The Add Controller window will be shown. Fill in controller information accordingly. Click OK to save the changes. Figure 2: Add Controller Window To configure GAC setup: Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > GAC Step 2: The GAC Setup window will be shown as below. Click Add to add a new GAC setup. Figure 3: GAC Setup Window Step 3: The Add GAC window will then be shown as below. Fill in GAC information accordingly and click OK to save the changes. Figure 4: Add GAC Window Step 4: The software will then prompt the following message window to indicate that the Record is added, Click OK to continue. Figure 5: Record Added Window To enable GAC feature and assign Controllers as client GAC controllers to enforce Global AntiPassback: Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Controller. Step 2: Select the controller to enable the enforcement of Global AntiPassback feature (as client GAC controllers) in Controller Setup window and click Modify to continue. Step 3: The Edit Controller window will be shown. Under the Client Global AntiPassback Settings section, at the Use GAC field, click on the drop-down dialog box and select Yes. Fill in the remaining information for the section as shown below. Figure 6: Client Global AntiPassback Settings Section in Edit Controller Window Tip Controller models supported as GAC Client: XP-SNETv3.36, XP-SNETv4, XP-M2000i v6.10 and above and XP-M1000i v6.00 and above. Step 4: The software will then prompt the following message window to indicate that the Record is Updated. Click OK to continue. Figure 7: Record Updated Window Step 5: To assign another controller as GAC Client Controller, repeat step 2 and step 3. Note Users can now proceed to complete the setup in xPortalNet Client by referring to the KB- ID-000110 How to Enable Client GAC Controller Setup in xPortalNet Client? for the complete steps.
Date Documentation:	3/7/2018 (Rev 1.0)