Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Problem (Issue) Statement:

How to configure Global AntiPassback Controller (GAC) settings in xPortalNet Server?

Description:

A guide to configure Global AntiPassback Controller (GAC) settings in xPortalNet Server.

Global AntiPassback feature allows the software to enforce AntiPassback in the global network (across different controllers connected in the same network).

When enabled, AntiPassback prevents a card user from gaining two successive accesses in the same direction without gaining access in the opposite direction first. AntiPassback therefore prevents double entry or exit access through a door or area for the same card access.

Related Software:

  • xPortalNet v1.5

Related Hardware:

  • XP-M1000iv2 / M1300i v6.00 above
  • XP-M2000i / M2300i v6.10 above
  • XP-SNET / SNETv4 v3.36 above
  • XP-GAC v2.40

System Application:

  • Door Access System
  • Car Park Access System
  • Turnstile Access System

Symptom and Finding:

NIL

Cause:

For first time configuration on Global AntiPassback Controller (GAC) settings in xPortalNet Server.

Solution:

Summary

  • To configure XP-SNET-GAC controller device setup.

  • To configure GAC setup.

  • To enable GAC feature and assign Controllers as client GAC controllers to enforce Global AntiPassback.


Note

Global Antipassback feature is only supported for LAN Network Communications.


Step-by-step Guide:

  • To configure XP-SNET-GAC controller device setup:

Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Connection > Add.


Step 2: The Add Connection window will be shown. Fill up the connection information accordingly. Click OK to save the changes.
Add Connection Window
Figure 1: Add Connection Window


Step 3: Go to xPortalNet Server > Server Admin > System Device Setup > Controller > Add.


Step 4: The Add Controller window will be shown. Fill in controller information accordingly. Click OK to save the changes.
Add Controller Window
Figure 2: Add Controller Window


  • To configure GAC setup:

Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > GAC


Step 2: The GAC Setup window will be shown as below. Click Add to add a new GAC setup.
GAC Setup Window
Figure 3: GAC Setup Window


Step 3: The Add GAC window will then be shown as below. Fill in GAC information accordingly and click OK to save the changes.
Add GAC Window
Figure 4: Add GAC Window





Step 4: The software will then prompt the following message window to indicate that the Record is added, Click OK to continue.
Record Added Window
Figure 5: Record Added Window


  • To enable GAC feature and assign Controllers as client GAC controllers to enforce Global AntiPassback:

Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Controller.


Step 2: Select the controller to enable the enforcement of Global AntiPassback feature (as client GAC controllers) in Controller Setup window and click Modify to continue.


Step 3: The Edit Controller window will be shown. Under the Client Global AntiPassback Settings section, at the Use GAC field, click on the drop-down dialog box and select Yes. Fill in the remaining information for the section as shown below.
Client Global AntiPassback Settings Section in Edit Controller Window
Figure 6: Client Global AntiPassback Settings Section in Edit Controller Window





Tip

Controller models supported as GAC Client: XP-SNETv3.36, XP-SNETv4, XP-M2000i v6.10 and above and XP-M1000i v6.00 and above.




Step 4: The software will then prompt the following message window to indicate that the Record is Updated. Click OK to continue.
Record Updated Window
Figure 7: Record Updated Window


Step 5: To assign another controller as GAC Client Controller, repeat step 2 and step 3.


Note

Users can now proceed to complete the setup in xPortalNet Client by referring to the KB- ID-000110 How to Enable Client GAC Controller Setup in xPortalNet Client? for the complete steps.

Date Documentation:

3/7/2018 (Rev 1.0)

  • No labels

© MicroEngine Technology Sdn Bhd (535550-U). All rights reserved.