| Problem (Issue) Statement: | How to perform the ColdStart operation for the XP-SR200K controller |
| Description: | This article will guide users on how to perform the ColdStart operation for the XP-SR200K controller. ColdStart operation must be performed if users forgot the MasterPIN to enter the Programming Menu to reset the MasterPIN to default settings. |
| Related Software: | NIL |
| Related Hardware: |
|
| System Application: | NIL |
| Symptom and Finding: | NIL |
| Cause: | For first time guide on how to perform the ColdStart operation for the XP-SR200K controller. |
| Solution: | The ColdStart Operation will erase all the memory in the XP-SR200K and reset all the settings to default. Proceed only if you are sure you want to reset the controller to default settings!. . Summary:
.
Step 1: Switch off the power for the XP-SR200K controller. . Step 2: Upon switching on the reader, it will enter the power up mode. The Red LED will be blinking at this stage for 10 seconds. . Step 3: In the power up mode while the Red LED is blinking, press and hold the exit button for 2 seconds. The controller will then reset to factory default settings. All the card users will also be cleared from the controller memory. . Note The default MasterPIN for the XP-SR200K is "123456". Users are advised to change the MasterPIN after performing the ColdStart operation. |
| Common Issues: | NIL |
| Porting Date: | 16/01/2020 |
PROOF-READ
.
.
.