Problem (Issue) Statement: | How to configure IP address for XP-GTR1500 / XP-GT3500 controller? |
Description: | A guide to configure IP address for XP-GTR1500 / XP-GT3500 controller. |
Related Software: | NA |
Related Hardware: |
|
System Application: | Single Door Access |
Symptom and Finding: | NA |
Cause: | For first time configuration of IP address for XP-GTR1500 / XP-GT3500 controller. |
Solution: | Summary
To Configure IP Address: Users can choose EITHER one of the 3 methods to configure the GT/GTR controller's IP address. Reminder! Method 3 is only available to xPortal3000 software. Step-by-step Guide:
Step 1: Press and hold the ColdStart button on the controller board. Note Users are advised to perform ColdStart operation once for every fresh installation unless advised otherwise.
Knowledge Base Link Users may refer to How to Pre-configure Network Connection for IP Controllers? to complete the process.
Step 1: Open IE browser (Internet Explorer) and type the default IP address in the address box. Note Default IP address for GT/GTR controllers: 192.168.1.20
Note Default User Name: admin Password: password10
Note Once the settings are saved, the Web Diagnostic is only accessible via the newly changed controller IP address.
Step 1: The following home screen will be shown at the controller's LCD: Note Default MasterPIN: 123456
Warning! The Port No. setting here MUST be the same as the setting for the software. Users are advised to use the default port no.
Warning! The Port No. setting here MUST be the same as the setting for the software. Users are advised to use the default port no.
Note If users leave the process at any stage, all changes made previously will not be saved and will be lost. To save the network changes, press √ until users reach this window and press √ again to confirm saving the changes.
Step 1: Login to xPortal3000 Client software and click Device Lookup.
|
Date Documentation: | 24/4/2018 |
Manage space
Manage content
Integrations