Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Problem (Issue) Statement:

How to set Door Open Time in xPortalNet software

Description:

This article will guide users to set Door Open Time in xPortalNet software.

Related Software:

  • xPortalNet

Related Hardware:

NIL

System Application:

NIL

Symptom and Finding:

NIL

Cause:

For first time guide to set Door Open Time in xPortalNet software.

Solution:







Tips

Supported Operating System: Window 10 (64-bits), Window 8 (64-bits), Window 8.1 (64-bits) and Window 7 (64-bits)

.

.

Summary:

  • To set Door Open Time in xPortalNet software.


Step-by-step Guide:

  • To set Door Open Time in xPortalNet software:

Step 1: Go to xPortalNet Client > Data Setup > System Setting > Doorselect the door to be modified > Modify. The Edit Door window will be shown. Configure the Door Open Time field as required. Click OK to save the changes.
Door Open Time in Edit Door Window
Figure 1: Door Open Time Field in Edit Door Window

.

Note

The Door Open Time setting is the duration where the door will remain open after an access is granted. After the Door Open Time duration has pass, the buzzer will then beep to indicate that the door has been left open.

Default value: 10 sec ; Min value: 0 sec ; Max value: 99 sec

If the Door Open Time is configured as "0", the door can be left open and the buzzer will not beep.

Common Issue

NIL

Date Documentation:

13/3/2020 (Rev 1.0)

PROOF-READ

.

Related Articles.

Containing the label "door-open-time"

Filter by label

There are no items with the selected labels at this time.

  • No labels