Versions Compared

Old Version 2

changes.mady.by.user Tan Rong Wei

Saved on

compared with

New Version Current

changes.mady.by.user Tan Rong Wei

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Problem (Issue) Statement:How to configure XP-MK800 address setting jumper
Description:

This article will guide users on how to configure XP-MK800 address setting jumper.

Related Software:
  • xPortalNet
Related Hardware:NIL
System Application:NIL
Symptom and Finding:NIL
Cause:For first time guide on how to configure XP-MK800 address setting jumper.

Summary:

.

Step-by-step Guide:

  • Anchor
    1
    1
    To configure XP-MK800 address setting jumper:

Step 1: Please locate the Address jumper on the XP-MK800 board. Configure the Address jumper based on the table that follows.
Address Jumper on XP-MK800 Board
Figure 1: Address Jumper on XP-MK800 Board

.

.

.

  • Anchor
    2
    2
    To configure Door Setup:

Step 1: Go to xPortalNet Server > Server Admin > System Device Setup > Door > Add or Modify. The Add Door or Edit Door window will then be shown. Configure the Unit No according to the XP-MK800 address setting as configured in section 1.
Add Door Window
Figure 3: Add Door Window

.

Info
titleSetting Example
  • Jumper Address Setting = 00, Unit No = "0"
  • Jumper Address Setting = 01, Unit No = "1"
  • Jumper Address Setting = 02, Unit No = "2"

.

.

Info
titleNote

For subsequent doors connected to the same, multi-door controller, please increment the Address setting and the Unit No accordingly.


Common Issues:

NIL

Porting Date:18/4/2019

...