...
Problem (Issue) Statement: | Why the XP-M1000i controller's buzzer keep beeping even though the door is closed | ||||||||||||||||||
Description: | Users noticed that the XP-M1000i controller buzzer is consistently beeping even though the door is closed. | ||||||||||||||||||
Related Software: | NIL | ||||||||||||||||||
Related Hardware: |
| ||||||||||||||||||
System Application: | NIL | ||||||||||||||||||
Symptom and Finding: |
| ||||||||||||||||||
Cause: |
| ||||||||||||||||||
Summary:
. Step-by-step Guide:
Step 1: Ensure that the door is properly closed, and that the both parts of the door sensor are in close proximity with one another. . Step 2: If the door is properly closed and both door sensors are in close proximity, users are advised to check if the door sensor is functional by swapping them with a known functioning unit. . .
Step 1: At the controller board, check and ensure that the controller enclosure is properly closed, and that the tamper switch on the enclosure cover is not activated (opened). . Step 2: Ensure that the tamper switch is properly connected to the tamper connector on the controller board. . .
Step 1: Find the Test Mode jumper on the controller board. Ensure that the jumper is opened, i.e. ensure that the jumper leads are exposed and not connected by any jumper terminals. | |||||||||||||||||||
Common Issues: | NIL | ||||||||||||||||||
Porting Date: | 9/4/2019 |
...
Section | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||
|
.
...
.
Choices for confluence | ||
---|---|---|
|