Versions Compared

Old Version 5

changes.mady.by.user Wan Lin Lee

Saved on

compared with

New Version Current

changes.mady.by.user Wan Lin Lee

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Problem (Issue) Statement:

How to assign XP-GLS5000 controller to Function as Lift Controller?

Description:

A guide to assign XP-GLS5000 controller to function as Lift Controller

Related Software:

  • xPortalNet HS v1.8.0.7 and above

Related Hardware:

  • XP-GLS5000 v1.16 and above

System Application:

  • Lift Masking System application

Symptom and Finding:

NA

Cause:

For first time configuration to assign XP-GLS5000 controller to function as Lift Controller.

Solution:







Summary:

  • To configure the XP-GLS5000 controller to function as Lift Controller.


Step-by-step Guide:

  • To configure the XP-GLS5000 controller to function as Lift Controller:

Step1: Turn "ON" DIP switch 1 for controller SETTING on XP-GLS5000 controller.
DIP Switches for Controller SETTING on the XP-SNET Controller
Figure 1: DIP Switches for Controller SETTING on the XP-SNET GLS5000 Controller


Step 2: The following table explains the functions of the DIP switches for controller SETTING on the XP-GLS5000 controller.



Step 3: After configuring the DIP switches, press "RESET" on the XP-GLS5000 controller to reset the controller in order for the new settings to take effect.


Info
titleNote

XP-GLS5000 controller can support readers such as RM800KLS, RM800KLP, RM80MS and RM80KLS.


Common Issues:Nil

Date Documentation:

15/1/2019

...