...
Problem (Issue) Statement: | I have just installed a XP-GT3200 or XP-GTR1200 Controller but it is not responding to flashed valid access card | ||||||||||||||||||||||||||||
Description: | After installing a XP-GT3200 / XP-GTR1200 unit, the door lock is not responding to the flashed valid access cards. | ||||||||||||||||||||||||||||
Related Software: | NIL | ||||||||||||||||||||||||||||
Related Hardware: |
| ||||||||||||||||||||||||||||
System Application: | Door Controller Mode | ||||||||||||||||||||||||||||
Symptom and Finding: | Downlink icon is not indicated on the controller's screen Door lock does not release / respond after flashing a valid access card. | ||||||||||||||||||||||||||||
Cause: |
| ||||||||||||||||||||||||||||
Solution: | Summary:. Step-by-step Guide:
Step 1: Check and ensure that the wiring connection is correct .
.
. .
Step 1: Check and ensure that Jumper J2 on MAS-RBU is shorted while MAS-RBT is opened. . .
Step 1: Connect site's current relay board to other known functional controller. Refer to Check Wiring Connection above for the relevant wiring diagram connection diagrams.
. . Step 2: Connect other known functional relay board to the current controller. Refer to Check Wiring Connection above for the relevant wiring diagram connection diagrams.
| ||||||||||||||||||||||||||||
Common Issues: | NIL | ||||||||||||||||||||||||||||
Porting Date: | 26/11/2018 (Rev 1.0) |
...
Section | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||
|
.
...
.
Choices for confluence | ||
---|---|---|
|