Page Comparison

Problem (Issue) Statement:

How to Configure Tenant Group in xPortalNet Software

Description:

Related Software:

xPortalNet v1.5.0.130 or higher

Related Hardware:

NIL

System Application:

Door Access System

Symptom and Finding:

Cause:

Solution:

.

.

Step 5: Click OK to confirm and save the changes. "Record Added !" message will be shown. Click OK. 

^{Figure 3: Record Added Message.}

Step 6: The Tenant record is successfully added. Repeat the steps for next tenant records.

^{Figure 4: List of Tenant Records Window.}

• Anchor
  configuretenantgroup configuretenantgroup

  To Configure the Tenant Group:

In these steps, user will be guided to manage grouping of tenants.

Step 1: Login to xPortalNet Client. 

Step 2: Open Tenant Group setup. Go to Data Setup > System Setting > Tenant Group.

Step 3: The following window will be shown. Click Add to add new tenant group.
Image Modified
^{Figure 5: Tenant Group Setup Window.}

Step 4: The following window will be shown. 

• Fill up the Code and Description of this tenant group.
• Check the box to add the tenant into this group.

Image Modified
<sup>Figure 6: Add Tenant Group Window.


Table 2: Tenant Group Field Description.</sup>

Step 5: Click OK to confirm and save the changes. "Record Added !" message will be shown. Click OK. 
Image Modified
^{Figure 7: Record Added Message.}

Step 6: The Tenant Group is successfully added. Repeat the steps for next tenant group.
Image Modified
^{Figure 8: List of Tenant Group Window.}

Document Date

19/07/2018 (Rev 1.0)