...
Problem (Issue) Statement: | How to configure software to perform READ only operation for Mifare card sector in xPortal3000 software | ||||||||||||||||||||||||||||||||||||||||||
Description: | A guide to configure software to perform READ only operation for Mifare card sector in xPortal3000 software. | ||||||||||||||||||||||||||||||||||||||||||
Related Software: |
| ||||||||||||||||||||||||||||||||||||||||||
Related Hardware: |
| ||||||||||||||||||||||||||||||||||||||||||
System Application: |
| ||||||||||||||||||||||||||||||||||||||||||
Symptom and Finding: | NA | ||||||||||||||||||||||||||||||||||||||||||
Cause: | For first time guide to configure software to perform READ only operation for Mifare card sector in xPortal3000 software. | ||||||||||||||||||||||||||||||||||||||||||
Solution: |
. . Summary
|
Anchor | ||||
---|---|---|---|---|
|
Info | ||
---|---|---|
| ||
Ensure that the HID OMNIKEY 5421 / 5422 card reader is correctly connected to PC before proceed. |
Info | ||
---|---|---|
| ||
Users can refer to How to Manually Install Device Driver for OMNIKEY 5421 or 5422 Card Reader for the complete steps to install the OMNIKEY device driver. |
Step 1: Go to xPortal3000 Client > Control Panel > System Properties.
Figure 1: System Properties Icon in Control Panel Menu
Step 2: The System Properties window will be shown. Click Modify and go to Mifare Card Options tab.
Figure 2: System Properties Window
Step 3: The Edit System Properties Window will be shown. At the Read Mode field, click the drop-down dialog box and select "By Block" to read the Mifare sector blocks.
Figure 3: Selecting By Block for Read Mode Field
Step 4: Under the Read / Write Options (Mifare Classic Only) section, ensure that the Programming Mode field is defined to be "Read Only". Next, system users have to define the Block No, Card No Length, and Start Location in Block to read the card ID stored in the Mifare card.
Figure 4: Mifare Sector Settings to Read Mifare Card
Step 5: System users can now enter the Read Key in Hex format and define the Read Key Type (whether key A or key B as Read Key). These details must be provided by the end-user or programmed card supplier. Click OK to save the changes.
Figure 5: Entering the Read Key and Specifying the Read Key Type
Info | ||
---|---|---|
| ||
|
Step 7: The following message window will then be shown to indicate that the Record is Updated. Click OK to continue.
Figure 6: Record Updated Window
To verify and read Mifare Sector Card ID number:Anchor 2 2
Step 1: Place the card to be read on the OMNIKEY card reader.
Step 2:Go to Mifare Card Programing and select Read Card.
Figure 7: Read Card Button in Mifare Card Programming Icon
Step 3: The software will read the card ID from Mifare card sector and the information of the card will be shown as below.
Figure 8: Details of the Read Mifare Card
Info | ||
---|---|---|
| ||
Only /wiki/spaces/SRN/pages/94241521and above is able to support HID OMNIKEY 5421 / 5422 reader. |
Date Documentation:
28/6/2018 (Rev 1.0)
...
Section | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||
|
.
...
.
Choices for confluence | ||
---|---|---|
|