Step 1: Ensure that the xPortalNet HS Services is running.
Step 2: Go to xPortalNet HS Server > Server Admin > Connection Setup.
Step 3: Click Add to add a new connection. The Add Connection window will be shown. Fill in all connection information accordingly. Click OK to save the changes.
Figure 1: Add Connection Window
Step 1: Go to xPortalNet HS Server > Server Admin > System Device Setup > Controller.
Step 2: Click Add to add a new controller. The Add Controller window will be shown. Fill in all controller information accordingly. Click OK to save the changes.
Figure 2: Add Controller Window
Tip |
---|
|
- XP-GLS300v4 and XP-GLS5000 controller are able to support Lift Operation mode.
- xPortalNet HS v1.8 only able to support XP-GLS300 firmware v4.00 and above.
|
.
.
Step 1: Go to xPortalNet HS Server > Server Admin > System Device Setup > Door.
Step 2: Click Add to add new Door. The Add Door window will be shown. Fill in all door information accordingly. Click OK to save the changes.
Figure 3: Add Door Window
.
.
Step 1: Go to xPortalNet HS Server > Server Admin > System Device Setup > Lift Panel.
Step 2: Click Add to add a new Lift Panel. The Add Lift window will be shown. Fill in all Lift Panel information accordingly. Click OK to save the changes.
Figure 4: Add Lift Window
.
.
Step 1: Go to xPortalNet Server HS > Server Admin > System Device Setup > Floor Relay.
Step 2: Click Add to add floor relay. The Add Floor Relay window will be shown. Fill in all floor relay information accordingly. Click OK to save the changes.
Figure 5: Add Floor Relay Window
Info |
---|
|
The table below shows the relay number scheme to be followed.
|
.
.
Step 3: The following screenshot shows an example to add floor relay.
Figure 6: Example of Floor Relay Setup
Step 5: Users can continue to create Floor Zone and Floor Accessibility at xPortalNet HS Client.
Info |
---|
|
Users can refer to KB- ID-000101 How to create Floor Zone and Floor Accessibility at xPortalNet HS v1.8 Client for the complete steps to create Floor Zone and Floor Accessibility configurations. |
.
.
Info |
---|
|
XP-GLS300v4 controller models can only be connected to Plato Reader model RM80KLS and RM80MS. |