Problem (Issue) Statement: | How to configure Plato QR Reader Address settings | ||||||||||
Description: | A guide to configure Plato QR Reader Address settings | ||||||||||
Related Software: |
| ||||||||||
Related Hardware: |
| ||||||||||
System Application: |
| ||||||||||
Symptom and Finding: | NIL | ||||||||||
Cause: | For first time guide to configure Plato QR Reader Address | ||||||||||
Solution: | Summary:
Step-by-step Guide:
Step 1: Power up the Plato QR reader (Connect VPP and GND). . Step 2: Prepare the respective QR codes for the corresponding Address to change the Plato QR Reader address setting. .
. . Step 3: User may refer to the table below to assign the required address for the respective Plato QR reader. . Step 4: Hold 1-2 seconds the target QR code for the Address towards the QR Code scanner on the Plato QR reader. . Step 5: Once the Plato QR reader detected the QR code for the address, the Plato QR reader will produce a beep sound.
| ||||||||||
Common Issues: | NIL | ||||||||||
Date Documentation: | 7/8/2020 (Rev 1.0) |
...
| Section | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||
|
.
...
.
| Choices for confluence | ||
|---|---|---|
|