Versions Compared

Old Version 9

changes.mady.by.user Tan Rong Wei

Saved on

compared with

New Version Current

changes.mady.by.user Tan Rong Wei

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Problem (Issue) Statement:

How to assign XP-SNET controller to function as Lift Controller

Description:

A guide to assign XP-SNET controller to function as Lift Controller.

Related Software:

NA

Related Hardware:

  • XP-SNET

System Application:

  • Lift Masking Lift Access System

Symptom and Finding:

NA

Cause:

For first time configuration to assign XP-SNET controller to function as Lift Controller.

Solution:








Warning
titleWarning!

The XP-SNET controller will not send fire alarm signal over to the connected XP-SNET-E32R and/or XP-SNET-E248 extension boards if the configuration settings for the XP-SNET controller is not completed.

Complete the configuration settings for XP-SNET controller in order for XP-SNET-E32R and/or XP-SNET-E248 to respond accordingly to fire alarm signals.

.

.

Summary

  • To configure the XP-SNET controller to function as Lift Controller.

Step-by-step Guide:

  • To configure the XP-SNET controller to function as Lift Controller:

Step 1: Turn "ON" DIP switch 1 for controller SETTING on XP-SNET controller.
DIP Switches for Controller SETTING on the XP-SNET Controller
Figure 1: DIP switches for controller SETTING on the XP-SNET controller


Step 2: The following table explains the functions of the DIP switches for controller SETTING on the XP-SNET controller:



Step 3: After configuring the DIP switches, press "RESET" on the XP-SNET controller to reset the controller in order for the new settings to take effect.

Date Documentation:

22/5/2018 (Rev 1.0)

...

Section
bordertrue


Column
width100%

Related Articles.

Containing the label "snet" AND "lift-access-mode"

Filter by label (Content by label)
showLabelsfalse
max100
showSpacefalse
sorttitle
cqllabel = "snet" and label = "lift-access-mode" and space = "MKB" and title ~ "!\"assign xp-snet controller to function as lift controller\""


.

...

.

Choices for confluence
_id5d09d13824c64e0020444e5a