Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Problem (Issue) Statement:

How to enrol face template with Suprema devices for face recognition

Description:This article will guide user to enrol face template for staff with Suprema face recognition devices.
Related Software:xPortalNet v1.5
Related Hardware:

MicroEngine controllers that support wiegand output, Suprema FaceStation2, Suprema FaceLite

System Application:NIL
Symptom and Finding:NIL
Cause:For first time guide to enrol face template for staff with Suprema face recognition devices.
Solution:


Warning
titlePre-requisites / requirements
  1. xPortalNet PS v1.5.19.187 and above.
  2. This module is enabled in Demo version. However, a license dongle is required in order to activate the module in full software version.
  3. 'MicroEngine Suprema Comm Services' is required for the integration to work. This services can only be installed on 64-bit OS and must be installed on the same machine as xPortalNet Services.

Summary:

  • Enrol face (Staff only).

  • Retrieve number of face template enrolled.

.

Step-by-step Guide:

  • Enrol face (Staff only):

Step 1: In xPortalNet Client software, go to Device Setup > Access Data Setting > Staff Records. In Staff Detail Setup, select staff and click Enrol Face button.
Enrol Face Button in Staff Detail Setup Window 
Figure 1: Enrol Face Button in Staff Detail Setup Window


Step 2: Select Device or door where Suprema device associated to. Next, select template box and click Start Capturing button. Show the staff's face on the device and follow the device’s instructions until successfully captured your face image.
Enrol Face Window 
Figure 2: Enrol Face Window


Step 3: The captured face image will be displayed in template box. User can select one of the templates as profile image by ticking the Use as Profile Image tickbox.
Tick the Use as Profile Image Tickbox 
Figure 3: Tick the Use as Profile Image Tickbox

.

Info
titleNote

The profile image will be downloaded to Suprema device. The profile image will be shown on Suprema face recognition device screen with staff's name after authenticated.

.

.

Step 4: To remove the image, select the template image box and click Remove button.
Click Remove to Remove Face Template 
Figure 4: Click Remove to Remove Face Template


Step 5: Click Save to save the enrolled face template(s).
Click Save to Save the Face Template 
Figure 5: Click Save to Save the Face Template


Step 6: The face templates will be installed to Suprema face recognition device after saved the face enrolment record. The number of face template installed on the device will be displayed in Communication Result as shown below.
Communication Retrieval Result Window 
Figure 6: Communication Retrieval Result Window

.

Note
titleGeneral Information

User can manually install the staff records to Suprema device, especially when the device is newly added to system, or the device is just back to 'normal' state after reset / cold start.

.

.

Step 7: Number of face enrolled will be displayed in the Staff Records.
Number of Face Enrolled Displayed in Staff Records Window 
Figure 7: Number of Face Enrolled Displayed in Staff Records Window


Step 8: Now staff can scan their face using Suprema face recognition device(s) to be granted access. We can see the valid entry or valid exit transaction in Latest Event List when staff gained a valid access.

Note
titleGeneral Information

If it does not turn on as expected, then user can retrieve card data from Suprema device as described in the section below.

.

.

  • Retrieve number of face template enrolled:

Step 1: Number of face template enrolled that has been downloaded to Suprema device can be retrieved by retrieving card data.

Device Comm > Retrieve Device Setting > Card Data
Delivery Report Window Showing Number of Face Template 
Figure 8: Delivery Report Window Showing Number of Face Templates



Note
titleGeneral Information

If it does not turn on as expected, then user can send the staff settings to Suprema device(s).

Commands that can be sent to Suprema devices: Install Card, Update Access, Delete Card, Install Template, Delete Template, Clear Card DB


Common Issues:NIL
Documentation Date:05/04/2020 (Rev 1.0)

Status
subtletrue
colourYellow
titleproof-read

...

Section
bordertrue


Column
width100%

Related Articles.

Containing the label "suprema-devices"

Filter by label (Content by label)
showLabelsfalse
max6
showSpacefalse
sortcreation
reversetrue
cqllabel = "suprema-devices" and space = "MICS" and title ~ "!\"How to Enrol Face Template with Suprema Devices for Face Recognition\""


.

...

.

Choices for confluence
_id5ed8b8594f0af40020ec73c4