...
| Problem (Issue) Statement: | Why the standalone reader keeps on producing beeping sound when door is closed |
| Description: | Standalone reader keeps beeping. |
| Related Software: | NIL |
| Related Hardware: |
|
| System Application: |
|
| Symptom and Finding: | When the door is closed, the reader keeps producing beep sounds |
| Cause: | Upon further investigation, it was discovered that the magnetic Door Sensor is not properly connected to the DS and 0V terminal |
| Solution: | Summary:
Step-by-step Guide:
Step 1: Please make sure that the wiring connection is correct. Step 2: Check and ensure that the wiring termination is connected properly and that the wires are not loose or improperly terminated.
Step 1: If problem persists even though wiring is connected correctly and properly, use a short jumper wire to connect directly from terminal DS to 0V. Step 2: If the problem persists after connecting the jumper wire from terminal DS to 0V, the reader is faulty. Please send the reader back to your supplier to request for repair works. |
| Porting Date: | 26/11/2018 (Rev 1.0) |
| Status | ||||||
|---|---|---|---|---|---|---|
|
.
| Section | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||
|
.
...
.
| Choices for confluence | ||
|---|---|---|
|