...
Problem (Issue) Statement: | How to perform the ColdStart operation for the XP-SR200K controllerMicroEngine standalone controllers | |||||||
Description: | This article will guide users on how to perform the ColdStart operation for the XP-SR200K controllerMicroEngine standalone controllers. ColdStart operation must be performed if users forgot the MasterPIN to enter the Programming Menu to reset the MasterPIN to default settings. | |||||||
Related Software: | NIL | |||||||
Related Hardware: |
| |||||||
System Application: | NIL | |||||||
Symptom and Finding: | NIL | |||||||
Cause: | For first time guide on how to perform the ColdStart operation for the XP-SR200K controllerMicroEngine standalone controllers. | |||||||
Solution: |
. . Summary:
.
Step 1: Switch off the power for the XP-SR200K controller. . Step 2: Upon switching on the reader, it will enter the power up mode. The Red LED will be blinking at this stage for 10 seconds. . Step 3: In the power up mode while the Red LED is blinking, press and hold the exit button for 2 seconds. The controller will then reset to factory default settings. All the card users will also be cleared from the controller memory. .
| |||||||
Common Issues: | NIL | |||||||
Porting Date: | 16/01/2020 |
...
Section | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||
|
.
...
.
Choices for confluence | ||
---|---|---|
|