Problem (Issue) Statement: | How to perform the ColdStart operation for MicroEngine standalone controllers | ||
Description: | This article will guide users on how to perform the ColdStart operation for MicroEngine standalone controllers. ColdStart operation must be performed if users forgot the MasterPIN to enter the Programming Menu to reset the MasterPIN to default settings. | ||
Related Software: | NIL | ||
Related Hardware: |
| ||
System Application: | NIL | ||
Symptom and Finding: | NIL | ||
Cause: | For first time guide on how to perform the ColdStart operation for MicroEngine standalone controllers. | ||
Solution: |
. . Summary:
.
Step 1: Switch off the power for the controller. . Step 2: Upon switching on the reader, it will enter the power up mode. The Red LED will be blinking at this stage for 10 seconds. . Step 3: In the power up mode while the Red LED is blinking, press and hold the exit button for 2 seconds. The controller will then reset to factory default settings. All the card users will also be cleared from the controller memory. .
| ||
Common Issues: | NIL | ||
Porting Date: | 16/01/2020 |
.
|
.
.