...
Problem (Issue) Statement: | How to configure and setup XP-SNET-GAC? | ||||||||||||
Description: | A guide to configure and setup XP-SNET-GAC. The XP-SNET-GAC controller supports Global AntiPassBack by cluster. The GAC controller acts as a centralized look up device with immediate location information update. Controllers at other doors will immediately obtain the latest location information of the card user. XP-SNET-GAC controller supports the following:
| ||||||||||||
Related Software: |
| ||||||||||||
Related Hardware: |
| ||||||||||||
System Application: |
| ||||||||||||
Symptom and Finding: | NIL | ||||||||||||
Cause: | NIL | ||||||||||||
Solution: |
Summary:
|
| Info |
|---|
Users are advised to perform ColdStart operation once after every first time power up of the controller; or when advised to do so by the technical support. |
- To perform pre-configuration setting for the network connection:
| Info | ||
|---|---|---|
| ||
Users may refer to How to Pre-configure Network Connection for IP Controllers to complete the process. |
- To perform network configuration settings for XP- SNET-GAC via Web Diagnostic:
Step 1: Open IE browser (Internet Explorer) and type the XP-SNET-GAC IP address in the address box. (Default IP address: 192.168.1.220)
Step 2: Enter the Username and Password and click Submit to login.
Figure 1: SNET Login Window
Step 2: The Welcome page will be shown as below. Click on Network Setting tab to continue. 
Figure 2: Web Diagnostic Welcome Page
Step 3: The Network Setting page will be shown. Configure the network setting according to the table that follows. Click Submit to save the changes made. 
Figure 3: Network Setting Page
Step 3: Click Log out to exit from web diagnostics. 
Figure 4: Logging Out from Web Diagnostic
Common Issue
NIL
Date Documentation:
2/11/2018 (Rev 1.0)
...