Page Comparison

Problem (Issue) Statement:

How to Configure Alarm Definition in xPortalNet Software

Description:

Alarm Definition is used to re-classify transaction as alarm events and its handling. All existing alarm transactions are initialized in Alarm Definition. User can modify the existing default Alarm Definition or create new one.

When the configured alarm is triggered, the transaction can be found from the Latest Alarm Event List tab at the Client main window. User can perform action like acknowledge alarm, mute alarm audio and jump to the floor plan where the device of the alarm triggered is located. 

Related Software:

xPortalNet PS v1.5.0.147 or higher

Related Hardware:

NIL

System Application:

Door Access System

Symptom and Finding:

Cause:

Solution:

Step 2: Open Alarm Definition. Go to Data Setup > System Setting > Alarm Configuration > Alarm Definition.

Step 3: The Alarm Definition Library window will be shown. 

Step 4: Click Add to add new Alarm Definition.
Image Modified
^{Figure 1: Alarm Definition Library Window.} 

Step 5: Fill up the fields according to the description below.
Image Modified
^{Figure 2: Add Alarm Definition Window.}

^{Table 1: Add Alarm Definition Field Description.}

Step 5: Configure the Options Tab.

• Anchor
  configureoptions configureoptions

  To Configure the Options Tab:

In these steps, user will be guided to configure the options for this Alarm Definition. These options provided to cater for most of user's preferences.

Step 1: Select Options Tab.

Step 2: Configure the fields according to the description below.
Image Modified
^{Figure 3: Options Tab Window.}

^{Image Modified
Table 2: Options Field Description.}

Step 3: Configure the Assigned Events Tab.

• Anchor
  configureassignedevents configureassignedevents

  To Configure the Assigned Events Tab:

In these steps, user will be guided to add new assigned events for this Alarm Definition. When the software received the configured transactiontransactions, it will then trigger the alarm.

Step 1: Select Assigned Events Tab.

Step 2: Click Add to add new assigned events
Image Modified
^{Figure 4: Assigned Events Window.}

Step 3: The Add Alarm Event window will be shown. Configure the fields according to the description below.
Image Modified
^{Figure 5: Add Alarm Event Window.}

Image Modified
^{Table 3: Add Alarm Event Field Description.}

Step 4: Configure the Configuration Tab.

• Anchor
  configureconfigurations configureconfigurations

  To Configure the Configurations Tab:

In these steps, user will be guided to configure the configurations for this Alarm Definition. These section consists sections consist of Instruction, Audio Notification and Alarm Icon configurations.

Step 1: Select Configurations Tab.

Step 2: Configure the fields according to the description below.
Image Modified
^{Figure 6: Configurations Window.}

^{Image Modified
Table 4: Configurations Field Description.}

Step 3: Configure the SMS / Email Notification Tab.

• Anchor
  configuresmsemailnotification configuresmsemailnotification

  To Configure the SMS/ Email Notification Tab:

In these steps, user will be guided to configure the smsSMS / email notification for this Alarm Definition. SMS / email notification will be sent to the selected user when the alarm is triggered.

Step 1: Select SMS / Email Notification Tab.

Step 2: Configure the fields according to the description below.
Image Modified
^{Figure 7:} Sms ^{SMS or Email Notification Window.}

^{Image Modified
Table 5:} Sms ^{SMS or Notification Field Description}

Step 3: Click OK to confirm and save the changes.

Document Date

31/07/2018 (Rev 1.0)