Page Comparison

Summary

• Overview of TTL ports on XP-SNET controller.

• To connect third party reader to TTL port on XP-SNET controller.

• To configure Door Settings on xPortalNet (with third party reader connected directly to TTL port).

Step-by-step Guide:

• Overview of TTL ports on the XP-SNET controller:

Step 1: Refer to the figure below for more information on the TTL port available on the XP-SNET controller:

Figure 1: 5 TTL ports on XP-SNET controller allowing connections up to 5 third party readers

• To connect third party reader to TTL port on XP-SNET controller:

Step 1: Please follow the wiring diagram as below:
 
Figure 2: Wiring diagram for third party readers using the TTL port

• To configure Door Settings on xPortalNet. (with third party reader connected directly to TTL port):

Step 1: Ensure that the Connection and Controller setup has been completed.

Step 2: For Door Setup, go to Server Admin > System Device Setup > Door > Add. The Add Door window will be shown as below:

Figure 3: Add Door window




Step 3: The table below shows the setting example for each door: