...
Problem (Issue) Statement: | How to configure address unit no on XP-SNET-E248 extension board? | |||||
Description: | A guide to configure address unit no on XP-SNET-E248 extension board. | |||||
Related Software: | NA | |||||
Related Hardware: |
| |||||
System Application: |
| |||||
Symptom and Finding: | NA | |||||
Cause: | For first time configuration for address unit no on XP-SNET-E248 extension board. | |||||
Solution: | Summary
Step-by-step Guide:
Step 1: The XP-SNET-E248 address setting for the DIP switch can be referred to as shown below:
Step 1: On the XP-SNET controller, ensure that both D33 & D34 LEDs in the "Downlink" section (lower left section of XP-SNET controller) is blinking to indicate that the XP-SNET controller has successfully established communication with the XP-SNET-E248 extension board. | |||||
Date Documentation: | 23/5/2018 (Rev 1.0) |