Problem (Issue) Statement: | How to configure address unit no on XP-SNET-E248 extension board | |
Description: | A guide to configure address unit no on XP-SNET-E248 extension board. | |
Related Software: | NA | |
Related Hardware: |
| |
System Application: |
| |
Symptom and Finding: | NA | |
Cause: | For first time configuration for address unit no on XP-SNET-E248 extension board. | |
Solution: | Summary
Step-by-step Guide:
Step 1: The XP-SNET-E248 address setting for the DIP switch can be referred to as shown below:
Step 1: On the XP-SNET controller, ensure that both D33 & D34 LEDs in the "Downlink" section (lower left section of XP-SNET controller) is blinking to indicate that the XP-SNET controller has successfully established communication with the XP-SNET-E248 extension board. | |
Date Documentation: | 23/5/2018 (Rev 1.0) |
.
|
.
.