Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


Problem (Issue) Statement:

How to Create a New Floor Plan Template in xPortalNet Software

Description:

In this release, the software has been improved with a new feature called Floor Plan Template. It comes with a Default Template but also allows users to create their own template. 

In the template, users can choose their own icon to be assigned according to the Icon Type selected. Eg: Camera, Controller, Door, Input, Output and etc.

This Floor Plan Template can be used in Floor Plan Setup.

Related Software:

xPortalNet v1.5.0.150 or higher

Related Hardware:

NIL

System Application:

Door Access System

Symptom and Finding:

NIL

Cause:

NIL

Solution:

Summary 

  • To Create a New Floor Plan Template.


Step-by-step Guide: 

  • To Create a New Floor Plan Template:

In these steps, user will be guided to create a new Floor Plan Template.

Information

Please add new Floor Plan Icon from the Floor Plan Icon Library prior to proceeding with the following steps.

.

Step 1: Run xPortalNet Server.


Step 2: Go to Data Setup System Setting Floor Plan Configuration Floor Plan Icon Template.


Step 3: Click Add.
To Create New Floor Plan Template
Figure 1: To Create New Floor Plan Template.


Step 4: Fill up the Code, Description and select the Icon Type for this Floor Plan Template.


Step 5: Then choose the Icon Code that you wish to assign for every Status in this template.Add Icon Template
Figure 2: Add Icon Template.


Step 6: In this step, we will select a new icon for "Arm" and "Disarm" statuses.
Select Icon for Arm Status
Figure 3: Select Icon for Arm Status.


Select Icon for Disarm Status
Figure 4: Select Icon for Disarm Status.


Step 7: Once all the Icon Code has been selected, click OK.
Confirm Icon Code Selection
Figure 5: Confirm Icon Code Selection.

Important

Please make sure that all Icon Code is selected. Otherwise you will get the following error message.
Field Cannot be Blank Message
Figure 6: Field Cannot be Blank ! Icon Message.

.
.

Step 8: The "Record Added" message will be shown.
Record Added Message
Figure 7: Record Added Message.


Step 9: You have successfully added new Floor Plan Template.
Successfully Added New Floor Plan Template
Figure 8: Successfully Added New Floor Plan Template.


Step 10: Finished.

Document Date

23/08/2018  (Rev 1.0)

PROOF-READ

  • No labels