How to Connect Door Accessories to XP-SNET-E5D Extension Board

Summary:

• General overview of input and output on the XP-SNET-E5D.

• To configure jumper settings for the door output relays on the XP-SNET-E5D.

• To connect door relays output on the XP-SNET-E5D.

• To connect door sensor on the XP-SNET-E5D.

.

Step-by-step Guide:

• General overview of input and output on the XP-SNET-E5D:

Step 1: Please refer to the figure as shown below for an overview of input and output points on the XP-SNET-E5D extension board.

Figure 1: Overview of Input and Output Points on XP-SNET-E5D Extension Board

.

.

• To configure jumper settings for the door output relays on the XP-SNET-E5D: 

Step 1: Configure the jumper settings according to the type of output relays required for the respective output.

Figure 2: Jumper Location for Relay Output Type

.

Step 2: The table below shows the examples according to different combinations of output relays specifications.

.

.

• To connect door relays output on the XP-SNET-E5D:

Step 1: Please refer to the figure as shown below for the connection to electromagnetic lock.

Figure 3: Wiring Connection from Output Point to Electromagnetic Lock

.

Step 2: Please refer to the figure as shown below for the connection to electric drop bolt lock.

Figure 4: Wiring Connection from Output Point to Electric Drop Bolt Lock

.

.

• To connect door sensor on the XP-SNET-E5D: 

Step 1: Follow the table as shown in the figure below to connect door input according to the input type for the respective doors.
 
Figure 5: Connecting Door Input to the XP-SNET-E5D Extension Board

.

Step 2: Please refer to the figure as shown below for an example of how to connect door sensor contact and exit button to XP-SNET-E5D extension board.

Figure 6: Wiring Connection from Door Sensor Contact and Exit Button to XP-SNET-E5D Extension Board