Summary
To install Suprema Fingerprint driver.
Step by step
To install Suprema Fingerprint driver:
Step 1: Unplug the BioMini scanner from Client PC.
Step 2: The driver for the BioMini can be obtained from the installation CD in the BioMini packaging box. Double-click on the driver installer file.
Figure 3: The Suprema Fingerprint Driver Installer File
Step 3: The InstallShield Wizard window will be shown. Follow the instructions to install the driver. Click Finish to complete the installation steps before plugging the BioMini to the Client PC.
Figure 4: InstallShield Wizard Window
Step 4: Open the Device Manager window to verify that the BioMini's driver is installed properly.
Figure 5: Device Manager Window
Step 5: Expand the Universal Serial Bus controllers tab. Right-click Suprema Fingerprint Scanner (Ver.02) > Properties. The Suprema Fingerprint Scanner (Ver.02) Properties window will be shown. Ensure that the "Device status" field is indicated as "This device is working properly."
Figure 6: Suprema Fingerprint Scanner (Ver.02) Properties Window
Step 6: Go to xPortal3000 Client > Staff Record. Click Show Template Or Enrollment to test the functionalities of the Suprema BioMini Scanner device.
Step 7: Place the finger on BioMini's sensor and click Start Capturing. The scanner indicator will light up and the scanner device will be able to capture the fingerprint image. The captured image will be displayed at Finger Print Template Details window.
Figure 7: Finger Print Template Details Window Showing the Captured Fingerprint Image
Info |
---|
|
- BioMini scanners purchased from MicroEngine are tested to work with all MicroEngine softwares.
- MicroEngine will not take responsibility of BioMini scanners purchased from third party companies which results in any interruptions to MicroEngine's software operations.
|