...
Problem (Issue) Statement: | How to continue the Mifare card programming process if the software prompted "The bulk write card task has been halted due to error" message | ||||||||||
Description: | This article will guide users on how to continue the Mifare card programming process if the software prompted "The bulk write card task has been halted due to error" message.
| ||||||||||
Related Software: |
| ||||||||||
Related Hardware: |
| ||||||||||
System Application: | NIL | ||||||||||
Symptom and Finding: | During the process of programming the Mifare cards, the software prompted the following error mesage: | ||||||||||
Cause: |
| ||||||||||
Summary:
.
. .
. . Step-by-step Guide:
Step 1: Upon the software prompting the error message, click OK to dismiss the error message. . Step 2: Click Restart for Fail Cases to restart the programming process. . Step 3: The software will then prompt the users to place the card again. . Step 4: Place the affected card properly on the programming reader. Do not lift or move the card until the enrolment is completed successfully. | |||||||||||
Common Issues: | NIL | ||||||||||
Porting Date: | 10/10/2019 |
...
Choices for confluence | ||
---|---|---|
|