Page Comparison

Problem (Issue) Statement:

How to configure the SMS Notification to notify the user when fire alarm is triggered

Description:

SMS Notification is a function where a notification message will be sent to the specified user's mobile phone number when the selected software event is triggered. You have to configure the SMS Notification and Notify User feature in xPortalNet Server prior to getting the notification.

The steps in this article is not restricted to Fire Alarm events only. You may select different event transactions according to your preferences.

Related Software:

xPortalNet v1.5.0.114 or higher

Related Hardware:

NIL

System Application:

Door Access System

Symptom and Finding:

Cause:

Solution:

.

.

Summary 

• To Configure the SMS Notification.

• To Configure the Notify User.

• Anchor
  confignot confignot

  To Configure the Notify User:

In these steps, user will be guided to configure the Notify User settings. In this setup, we will configure the mobile number of the user that will receive the notification when the selected event is triggered.

Step 1: Go to Server Admin > Notify User.

Step 2: Click Add to add new user notification.
Image Modified
^{Figure 5: Click Add.}

Step 3: At Notification Setup, configure the following according to the field description below.

• Enter User ID and Name.
• Enter Mobile Phone Number and Alternate Mobile Phone Number (Optional).
• Check Activate to activate the notification for this mobile phone number.
• Check event Pp (Fire Alarm On).

Image Modified
^{Figure 6: Add Notification.}

Image Modified
^{Table 1: Add Notification Field Description.}

Step 4: Click OK to confirm and save the changes.
Image Modified
^{Figure 7: Record Added message.}

Step 5: Finished.

Document Date

06/09/2018  (Rev 1.0)