...
Problem (Issue) Statement: | How to configure Instruction Control for alarm monitoring system application at xPortalNet Client? | ||||||||||||||||||||||||||||||||||||||||
Document No: | ID-000059 | ||||||||||||||||||||||||||||||||||||||||
Categories: | Knowledge Base | ||||||||||||||||||||||||||||||||||||||||
Type: | Software configuration | ||||||||||||||||||||||||||||||||||||||||
Technical Level: | 1 | ||||||||||||||||||||||||||||||||||||||||
Related Project Name: |
| ||||||||||||||||||||||||||||||||||||||||
Site Deployment Date: | 8/3/2017 | ||||||||||||||||||||||||||||||||||||||||
Description: | A guide to configure Instruction Control for alarm monitoring system application at xPortalNet Client. | ||||||||||||||||||||||||||||||||||||||||
Related Software: |
| ||||||||||||||||||||||||||||||||||||||||
Related Hardware: |
| ||||||||||||||||||||||||||||||||||||||||
System Application: | Alarm Monitoring System | ||||||||||||||||||||||||||||||||||||||||
Symptom and Finding: | NA | ||||||||||||||||||||||||||||||||||||||||
Cause: | For first time configuration on Instruction Control for alarm monitoring system application at xPortalNet Client | ||||||||||||||||||||||||||||||||||||||||
Solution: | Summary
Step by Step:
Step 1: Open xPortalNet Comm Service.
Step 1: Go to xPortalNet Client > System Setting > Instruction Control. The Instruction Setup window will be shown as below:
Step 1: After completing the configuration settings, users MUST send all settings to the controller.
Step 1: To check the status of the controller, go to xPortalNet Client > Device List > Controller List to verify that the controller Status is Up.
| ||||||||||||||||||||||||||||||||||||||||
Date Documentation: | 24/5/2018 (Rev 1.0) |
...