for the complete steps to install the device driver for HID OMNIKEY 5421 / 5422 card reader. |
Step 2: Go to xPortalNet HS Client > Data Setup > Access Data Setting > Staff Record > Get Now!
Image Modified
Figure 1: Get Now! Icon in Staff Detail List Window
Step 3: Click Add to Add new card user. The Add Staff Detail window will be shown as below.
Image Modified
Figure 2: Add Staff Detail Window
Step 4: Under the Card Type field, select DESFIRE.
Image Modified
Figure 3: Selecting DESFIRE as the Card Type
Step 5: Next, place the DESFire® card on OMNIKEY card reader and click Read to read the Card Serial Number of the DESFire® card. The software will automatically fill in the Card Serial Number field once the serial number is read from the card.
Image Modified
Figure 4: Reading the DESFire Card Serial Number
Step 6: System users can now create the Card ID under the Card No field (default card number length is 20-digits) and fill in the other fields as necessary in the General tab as below.
Image Modified
Figure 5: Filling up the Staff Information in the General Tab
Info |
---|
|
- Fields highlighted in yellow cannot be changed after details are saved.
- The fields marked with * are compulsory to be filled up.
|
Image Modified
Step 7: Next, users have to assign a door accessibility level for the newly added staff. At the Add Staff Detail window, click Press to Select .. under the Door Access Code field. The Select Door Access window will be shown as below. Check the door accessible by the staff and click OK to continue.
Image Modified
Figure 6: Select Door Access Window
Step 8: Select the verification mode by Door for this card user at Verification Mode tab and click OK to continue.
Step 9: The following message window will be shown to indicate that the Record is Added. Click OK to continue.
Image Modified
Figure 7: Record Added Window
Step 10: The Send Data and Command window will be shown. Please wait for the Send Data and Command process to complete before clicking Close.
Image Modified
Figure 8: Send Data and Command Window
Step 11: Ensure that the newly added staff record is listed in the Staff Detail Setup window.