Problem (Issue) Statement: | How to setup Lift Access System Using XP-QNET controller? | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Description: | A guide to setup Lift Access System using XP-QNET controller. . For Lift access system application, the XP-QNET controller is used as Lift Controller and is connected to XP-SNET-E32R extension board for integration with Lift's Call Operation Panel to control the lift call buttons. The XP-MK820 reader interface module will be connected to Plato-Q81MS reader in support of multi-card types as access credential such as QR code, Mifare classic and Mifare Desfire cards. . Each XP-QNET controller is able to support up to a maximum of 10 number of Lift panels and a total relay output of 128. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Related Software: |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Related Hardware: |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
System Application: |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Symptom and Finding: | NIL | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cause: | For first time guide to setup Lift Access System using XP-QNET controller. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Solution: | Summary:
Step 1: To configure XP-QNET controller to function as Lift Controller.
. .
Step 1: To assign a static IP Address to XP-QNET controller via web diagnostic.
. .
Step 1: XP-QNET controller has two ways to connect to the reader. For connection to Plato QR Reader, this can be directly connected to the controller. Alternatively, users should use the XP-MK820 Reader interface module to connect to third-party readers or facial recognition terminal devices.
. .
. . Step 2: To assign Plato QR reader address or XP-MK820 Address Jumper Setting.
. .
Step 1: To configure output relay jumper settings for XP-SNET-E32R.
. . Step 2: To configure address number on the XP-SNET-E32R extension board.
. . Step 3: To connect the XP-SNET-E32R extension to XP-QNET controller.
. . Step 4: To connect the Elevator COP buttons to XP-SNET-E32R extension board.
. .
Step 1: Launch xPortalNet HS PS v2.0 Server. . Step 2: To add new connection, controller, door, lift panel and floor relays.
. .
Step 1: Launch xPortalNet HS PS v2.0 Client. . Step 2: To create new floor zone & floor accessibility.
. . . Step 4: During testing, create a new card user and assign door accessibility & floor accessibility for complete testing of the configuration. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Common Issues: | NIL | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Date Documentation: | 21/9/2020 (Rev 1.0) |
...
Section | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||
|
.
...
.
Choices for confluence | ||
---|---|---|
|